Miso Clinic · Clinical column

Density pain — how much does it hurt?

This is one of the things people researching Density search for most. Knowing how much it hurts beforehand makes you feel much easier. And pain has one more important role. I hope you read that part before you come.

Clinical column About 5 min September 2026 Miso Clinic, Daegu · Dr. Lee Chi-Hak, Medical Director

The short answer

Density hurts in a way where a hot feeling rises briefly and settles, again and again. It is not constant pain; it comes in waves. In the human data on Density, reported pain averaged 1.4/5, and no burns · persistent redness · scarring were reported. Areas close to bone or with thin skin are more sensitive, and numbing cream is used depending on the area. But you must not put up with heat that is hard to bear. That is a safety signal that the setting needs to change. Miso Clinic in Daegu performs Density and tells you beforehand so you can speak up straight away during treatment. Miso Clinic in Daegu is at 4F Bombom Building, 125 Dongdeok-ro, Jung-gu, Daegu, in front of Exit 1 of Kyungpook National University Hospital Station. +82-53-428-2700; weekdays 11:00–19:00 · Saturday 10:00–16:00 (no lunch break); closed Sundays · public holidays.

What does the pain feel like?

RF makes heat inside the skin. While that heat rises, a feeling close to “ow, hot” comes briefly and then cools. It is a different kind of pain from a needle prick. It does not hurt throughout the treatment; it comes briefly with each pass.

Density pain — reported figures and conditions
ItemDetail
Reported painAverage 1.4/5 (16 Japanese patients · 500–600 shots per session · 24-week case series)
Adverse eventsNo burns · persistent redness · scarring reported
More sensitive areasClose to bone, like the forehead · jawline; thin, like around the eyes
Less sensitive areasFleshier areas like the cheeks
AnaesthesiaNumbing cream, depending on the area

The number is only an average. Even on the same area at the same setting, some say it is bearable and some find it very hard. It also varies with how you feel that day and with the menstrual cycle.

There are signals you must not put up with

Please remember this. Heat during treatment is also a safety device telling us “the heat is too much right now.”

  • Heat that is hard to bear — tell us straight away. It means output or speed must change.
  • One spot unusually hot — contact or cooling needs checking.
  • A shooting, tingling sensation — it may be where a nerve runs, so we adjust the position.

Reports of RF fat atrophy point out that covering this feeling completely with strong anaesthesia can tilt things towards overtreatment. Fat atrophy appears at 1–4 months (average 2 months) and was reported at about 4 per 10,000 treatments. That is why Miso Clinic chooses to proceed with numbing cream and leave the sensation in place.

Realistic ways to reduce pain

  • Split the areas — easier than doing the whole face at once.
  • Take a break — pausing briefly is better than enduring.
  • Keep to the numbing-cream time — it needs to be on long enough to work.
  • Book on a day you feel well — many people are more sensitive around their period.
  • Tell us in advance — if you let us know you are sensitive to pain, we plan the design differently.

Whether sedation is even needed is discussed in Ulthera sedation in Daegu.

What you feel after treatment is a different story

Heat during treatment and the sensation after it is over should be looked at separately.

Common sensations after treatment, and when
WhenWhat it feels likeWhat to do
Right after – a few hoursRedness, a burning feelingUsually settles on its own
Same day – one dayTightness, slightly swollen feelingThis is immediate contraction and swelling
A few daysAchy when pressedNot uncommon
Within 72 hoursBlisters · severe painThis is when burns appear — contact us straight away
1–4 monthsA sunken feelingThis is when fat atrophy appears

Timing and management of side effects are covered in detail in Density · XERF side effects and burns.

In summary — what is established and what is not

Established

  • In the human data on Density, pain averaged 1.4/5 and no burns were reported
  • Areas close to bone or thin are more sensitive
  • It has been pointed out that strong anaesthesia can mask pain feedback

Not established

  • Studies comparing which pain-reduction method is better
  • The relation between pain level and result
  • Studies directly comparing pain from Density and other devices

Density pain: frequently asked questions

Does Density hurt a lot?

With Density, a hot feeling comes briefly and cools, again and again. In the human data on Density, reported pain averaged 1.4/5, but how it feels depends on the area, the setting and how you feel that day.

Which area hurts most with Density?

Areas close to bone like the forehead and jawline, and areas with thin skin like around the eyes, are more sensitive. Fleshier areas like the cheeks tend to be less so.

Is anaesthesia used for Density?

Numbing cream is used depending on the area. Miso Clinic does not cover the sensation completely with strong anaesthesia; we proceed with cream. Pain is also a signal that the heat is too much.

If it gets hot during treatment, should I put up with it?

You must not. Heat that is hard to bear is a safety signal that output or speed needs to change. If one spot is unusually hot or you feel a shooting, tingling sensation, tell us straight away too.

Can a burn happen after Density?

No burns were reported in the human data on Density. But if an RF burn does occur, it appears within 72 hours, so contact us straight away if you have blisters or severe pain.

Is it normal to feel achy a few days after Density?

An achy feeling when pressed is not uncommon. But if a sunken feeling appears between 1 and 4 months, it may be fat atrophy and needs checking.

I am very sensitive to pain. Can I have Density?

It can be managed by splitting the areas or taking breaks. If you tell us in advance that you are sensitive to pain, we plan the design differently. Sometimes we look first at another device with less need for anaesthesia.

Where can I have Density in Daegu?

Miso Clinic in Daegu performs Density. It is at 4F Bombom Building, 125 Dongdeok-ro, Jung-gu, Daegu, in front of Exit 1 of Kyungpook National University Hospital Station, +82-53-428-2700. Open weekdays 11:00–19:00 and Saturday 10:00–16:00; closed Sundays and public holidays.

Clinical columns to read next

Product reference

Product reference: Density · other devices at the same clinic: XERF · Oligio Kiss

Clinic

This column was written and reviewed by Lee Chi-Hak, MD, medical director of Miso Clinic in Daegu. The treatment criteria and injection design are written exactly as we actually use them.

Miso Clinic
Medical DirectorLee Chi-Hak, MD
Address4F Bombom Building, 125 Dongdeok-ro, Jung-gu, Daegu (Exit 1, Kyungpook National University Hospital Station) · tower parking in the building
Phone053-428-2700
KakaoTalk consultationMiso Clinic Daegu channel
KakaoTalk channelAdd the channel
Opening hoursWeekdays 11:00–19:00 (lunch 13:00–14:00) / Saturday 10:00–16:00 (no lunch break) / Closed Sundays and public holidays
Clinical columnSee all columns
Reference libraryAll booster and lifting device references

References

  1. Human data on Density — Oku K, J Cosmet Dermatol 2025;24(10):e70504, PMID 41090512. DENSITY (Jeisys Medical) is named in the paper. 16 Japanese patients (1 man · 15 women, mean age 49.4 ± 6.1) · about 500–600 shots per session · 24 weeks · no control group · single author. Tightening 0.82 mm, lower-face thickness −0.89 mm, GAIS improved in 15 of 16, pain 1.4/5, no burns · persistent redness · scarring reported. Values in the abstract (0.82 ± 0.36) and body text (± 0.34) differ.
  2. Timing and frequency of RF adverse events (older devices) — Fitzpatrick R et al., Lasers Surg Med 2003;33:232–242 (86 people): blisters immediately 2.3% · within 72 hours 3.8%, second-degree burns 21 of 5,858 (0.36%) — figures for 2002 high-energy single-pass technique, not current incidence.
  3. Fat atrophy — Narins RS et al., Dermatol Surg 2006;32:115–124. Appears at 1–4 months (average 2 months), about 4 per 10,000 treatments. Notes that strong anaesthesia blocks pain feedback.
  4. Density specifications — Jeisys Medical published material: sequential monopolar → bipolar delivery, up to 400 W, RIC automatic impedance adjustment, 5-level gas cooling, real-time skin temperature, tips ALPHA 600 · Eye 600 · Face 1,000 · Body 600 shots (guaranteed shot counts). MFDS-approved medical device; approval number not confirmed in the original.
  5. Timeline of RF results — Cosmetics 2024;11(3):71 (20 Korean women: clinical assessment not significant at 4 weeks · significant at 12 · 24 weeks; device-measured elasticity from 4 weeks) · Weiss 2026 (84.6% at 30 days → 92.3% at 90 days) · Fitzpatrick 2003 and Edwards AF et al., Dermatol Surg 2013;39:104–110 (peak at 4–6 months). None had a control group.
  6. Korean medical advertising law — Medical Service Act Article 56(2), which prohibits testimonial advertising, comparison with other medical institutions and superlative claims.
  7. Miso Clinic clinical guidelines — criteria for indications, design by area, pre-treatment explanation and consent. The source of sentences marked “clinical judgement” in this column.

Everything in this column is general information and does not replace medical diagnosis or treatment. Effects and side effects vary with individual skin condition, age and underlying illness, and the same result is not guaranteed for everyone. Any decision to proceed should be made in an in-person consultation with a physician.

← Clinical columns · Reference library · Miso Clinic home

한국어 · English · 日本語