Density Noir vs Density: what is the same and what is different?
“I’d like Noir, please.” “Is the result different between Noir and plain Density?” These are what we hear most in the consulting room these days. A new device raises expectations, but once you separate what is the same from what is different, it becomes clear what to ask.
The short answer
The principle of heating from within with RF, the structure of using monopolar · bipolar in sequence, and the 400 W maximum are the same. What changed is cooling precision, Gentle · Infinity modes, the bipolar-only BOOST tip and real-time temperature display on the handpiece. We have not yet found a study comparing the two devices side by side in the same people. So we do not tell you “results are better because it is Noir.” Results depend more on the state of the face, the tip, the shot count and the design. Miso Clinic in Daegu (4F Bombom Building, 125 Dongdeok-ro, Jung-gu, Daegu, +82-53-428-2700) added Density Noir in October 2026.
What is the same as the earlier Density?
- The principle of making heat inside the skin with RF current
- The structure of using monopolar and bipolar in sequence within one shot
- Maximum output 400 W, and adjusting energy to the skin’s resistance (impedance)
- Gas cooling of the epidermis, adjustable in 5 levels
- Genuine tips are fitted, and each tip has a set shot count
So what changed?
| Item | Earlier Density | Density Noir |
|---|---|---|
| Cooling | 5-level gas cooling | More precise gas-spray (DCD) cooling, with real-time epidermal temperature monitoring |
| Pressure sensing | — | Gentle mode: output even at low pressure |
| Continuous output | — | Infinity mode: continuous output during contact with the BOOST tip fitted |
| Tip | Classic · High · ALPHA and others | Bipolar-only BOOST tip added, 8-tip portfolio |
| Handpiece | — | LCD shows skin temperature · shot count · energy delivered; level · mode adjusted in the hand |

Is there a difference the patient can feel?
The first thing people notice is the cooling. The cooling steps before and after each shot are close together, so the sense of “hot, then cool right away” is clear. On thin areas, Gentle mode lets output go in without pressing hard.
Pain differs by person and by area. We have not found data comparing pain from Noir and the earlier Density in the same people. So we do not say “it doesn’t hurt”; we match output and cooling while asking about heat in each area. We wrote about Density pain in Density pain, honestly.
Are results better with Noir?
To be honest, no comparative study shows that yet. For people treated with Noir, a US retrospective series of 25 and a Thai series of 26 have been reported, and neither had a control group. In the Thai data, clear improvement at 6 months was 47.83%; redness · swelling were common but temporary.
More important than the device being new are these four: whether the cause of the sagging is right for it, whether the tip suits the layer to be treated, whether the shot count is within range, and whether the judgement is made two to three months later. Even with the same Noir, if these differ, the result differs.
What should I ask at the consultation?
- Whether the unit is Noir and which tip is used — ask to see the genuine box and card
- How many shots, split over which areas
- How cooling and output are matched, and whether they ask about heat as they go
- When, and with what photos, you will review the result together
When we do not recommend it
- Expecting results from the device name, such as “it’s Noir, so once is enough”
- Metal or electronic implants in the face, or pregnancy
- When lost volume, rather than sagging, is the main concern
Density Noir vs Density: frequently asked questions
What is the biggest difference between Density Noir and Density?
The principle is the same; cooling precision · Gentle mode · Infinity mode · the bipolar-only BOOST tip · real-time temperature display on the handpiece changed.
Does Density Noir hurt less?
Cooling is closer-spaced, but we have not found data comparing pain in the same people. We match output and cooling while asking about heat in each area.
When do Density Noir results show?
RF lifting needs time for the collagen response, so we judge it two to three months later with photos under the same conditions.
Where can I get a Density Noir consultation in Daegu?
Miso Clinic in Daegu (4F Bombom Building, 125 Dongdeok-ro, Jung-gu, Exit 1 of Kyungpook National University Hospital Station), +82-53-428-2700. Weekdays 11:00–19:00 · Saturday 10:00–16:00; closed Sundays · public holidays.
Clinical columns to read next
Product reference
Treatment reference: DENSITY — RF lifting with sequential monopolar · bipolar delivery
Clinic
This column was written and reviewed by Lee Chi-Hak, MD, medical director of Miso Clinic in Daegu. The treatment criteria and injection design are written exactly as we actually use them.
| Medical Director | Lee Chi-Hak, MD |
|---|---|
| Address | 4F Bombom Building, 125 Dongdeok-ro, Jung-gu, Daegu (Exit 1, Kyungpook National University Hospital Station) · tower parking in the building |
| Phone | 053-428-2700 |
| KakaoTalk consultation | Miso Clinic Daegu channel |
| KakaoTalk channel | Add the channel |
| Opening hours | Weekdays 11:00–19:00 (lunch 13:00–14:00) / Saturday 10:00–16:00 (no lunch break) / Closed Sundays and public holidays |
| Clinical column | See all columns |
| Reference library | All booster and lifting device references |
References
- Density Noir product brochure — Jeisys Medical Inc. Up to 400 W, MONO-BI RF Sequential Heating Technology (Korean patent 10-2640900, sequential · continuous monopolar · bipolar output), 8-tip portfolio (bipolar RF tip added), real-time impedance feedback, 5-level cooling · gas-spray epidermal protection · real-time epidermal temperature monitoring, Gentle Mode · Infinity Mode, handpiece LCD (skin temperature · shot count · energy delivered). Photographed from the brochure held by Miso Clinic.
- Report of MFDS approval of Density Noir · BOOST tip — Medical Newspaper (Uihak Sinmun), 2026-09-04. Successor unit to Density High, improved DCD cooling, Gentle mode (output conditions chosen by how far the tip is pressed) · Infinity mode (continuous output at a set level) added; the BOOST tip is the first bipolar-only tip in the Density line-up. Tip lineage: Classic (monopolar only) · High · ALPHA (mono + bi) · BOOST (bi only).
- Density Noir launch news — Edaily, 2026-09-09. 100 units ordered within 12 days of launch, more precise DCD gas-spray system, Gentle · Infinity modes added.
- Human data on Density Noir — Veltri et al. 2026 (PMID 41664412, US retrospective, 25 people, only those who completed photos · questionnaires) · Chottawornsak et al. 2026 (PMID 42187039, Thailand, 26 people, clear improvement at 6 months 47.83%, redness 96.15% · swelling 61.53%, temporary). Neither had a control group. (As cited in the site’s existing column daegu-density-reviews)
- Korean medical advertising law — Medical Service Act Article 56(2) (no treatment testimonials, comparison with other clinics or superlatives) and Article 27(3) (no inducing patients for profit). This is why this column carries no prices, reviews or before-and-after photos.
Everything in this column is general information and does not replace medical diagnosis or treatment. Effects and side effects vary with individual skin condition, age and underlying illness, and the same result is not guaranteed for everyone. Any decision to proceed should be made in an in-person consultation with a physician.