Radiofrequency around the eyes: is it safe? — Eye shield · ICD cooling · Wave Fit explained
When people hear radiofrequency will be used around the eyes, many first want to know how safety is ensured. XERF is designed to reduce epidermal heat injury by combining a non-metal eye shield, ICD cooling with every pulse, Wave Fit Pulse, and a non-compressive moving technique. The key point is that safety is made by the device and technique together.
The short answer
The eye area has thin skin and is close to the eyeball, making it the area that needs the most care in radiofrequency treatment. XERF requires a non-metal (silicone · plastic) ocular eye shield to be worn before treatment, applies ICD cooling (contact cooling) with every pulse, and treats with Wave Fit Pulse and a non-compressive moving · spider pattern. The basic premise of the manufacturer’s training materials is that safety requires not only the device’s design but also the technique of the person using it.
Why a non-metal eye shield is essential
XERF is a monopolar radiofrequency device, and metal reacts to radiofrequency and can create unwanted heat, so it can’t be used for eye-area treatment. So before any treatment involving the eye area, a non-metal (silicone · plastic) ocular eye shield is worn to protect the eyeball.
- A non-metal ocular eye shield must be worn before eye-area treatment
- Metal shields can’t be used in radiofrequency treatment
- Performing eye-area radiofrequency with a metal shield
ICD cooling with every pulse
XERF is designed so that ICD cooling (contact cooling) works with every pulse to protect the epidermis. According to the manufacturer’s training materials, ICD isn’t fixed at one strength but set at different levels such as ICD1–3 depending on the area. This means the same cooling isn’t applied to thin areas and relatively thick ones.
Wave Fit Pulse and non-compressive moving · spider pattern
Wave Fit Pulse is a way of delivering energy by adjusting the waveform. Added to this are a non-compressive moving technique, which moves and overlaps passes without pressing on one point, and a spider pattern, so that energy doesn’t concentrate excessively in any one area. Together these elements are designed to reduce pain, but it can’t be asserted that treatment is done “without pain.”
- Wave Fit Pulse adjusts the energy delivery waveform
- Non-compressive moving — treating while moving, without pressing on one point
- Spider pattern — overlapping pass paths for even distribution
Caution: eye-area treatment must be done with a non-metal eye shield worn, using skilled technique. The device’s safety design and the practitioner’s technique cannot substitute for one another.
At Miso Clinic
Miso Clinic in Daegu uses XERF not only for face lifting but for tailored treatment by choosing effectors by area, such as the eyes · brows · nose pores. Brow lifting and under-eye fat tightening use i10, and thinner areas such as the eyelids are supplemented with i05; whichever effector is used, as long as the eye area is involved, the same basic safety measures — non-metal eye shield · ICD cooling · Wave Fit Pulse · non-compressive moving — apply. Miso Clinic is a XERF ambassador clinic selected by Cynosure Lutronic and follows these device standards in treatment.
Frequently asked questions
Is there a risk of eye injury when XERF is used around the eyes?
Before eye-area treatment, a non-metal ocular eye shield is always worn to protect the eyeball. Metal shields can’t be used with radiofrequency, so we don’t use them at all.
Is ICD cooling applied the same to every area?
No. ICD levels (e.g. ICD1–3) are set differently by area. According to the manufacturer’s training materials, cooling strength is adjusted to the thickness and sensitivity of the area.
What does Wave Fit Pulse do?
It is a technology that adjusts XERF’s energy delivery waveform. Applied together with ICD cooling with every pulse and non-compressive moving, it is designed to reduce epidermal heat injury.
Is XERF eye-area treatment completely painless?
It can’t be asserted that it is done “without pain.” But technologies designed to reduce pain, such as Wave Fit Pulse, ICD cooling with every pulse and non-compressive moving, are applied.
Why are non-compressive moving and the spider pattern needed?
To reduce excessive concentration of energy in one area by moving and overlapping passes rather than pressing on one point. This is a technique element for protecting the epidermis.
What should I check at a clinic for safe XERF treatment?
It’s a good idea to check at consultation whether both device and technique are in place: whether a non-metal eye shield is used, ICD settings by area, and whether Wave Fit Pulse and non-compressive moving are applied.
Clinic
This column was written and reviewed by Lee Chi-Hak, MD, medical director of Miso Clinic in Daegu. The treatment criteria and injection design are written exactly as we actually use them.
| Medical Director | Lee Chi-Hak, MD |
|---|---|
| Address | 4F Bombom Building, 125 Dongdeok-ro, Jung-gu, Daegu (Exit 1, Kyungpook National University Hospital Station) · tower parking in the building |
| Phone | 053-428-2700 |
| KakaoTalk consultation | Miso Clinic Daegu channel |
| KakaoTalk channel | Add the channel |
| Opening hours | Weekdays 11:00–19:00 (lunch 13:00–14:00) / Saturday 10:00–16:00 (no lunch break) / Closed Sundays and public holidays |
| Clinical column | See all columns |
| Reference library | All booster and lifting device references |
This article is general medical information and does not replace a consultation. Whether a treatment is suitable, how it is done, and whether to have it must be decided after an examination.